Hearing Aid Terminology You Should Know

Hearing aid and hardware explaine to a customer by a hearing aid expert.

It can be difficult to choose a hearing aid because there is so much information and so many terms that you may not understand. That’s why it’s important to be familiar with the basic terminology that is associated with hearing aids.

It can be intimidating to choose a hearing aid at first because there is a lot of information and terminology that you may find difficult to understand, and there are many options to choose from. This is a comprehensive list of hearing aid terminology, that is associated with hearing aids, that you should know.

Behind-the-ear (BTE) hearing aid

This is a hearing aid that is placed behind the ear and is connected to a slim tube and dome or an ear mold which is placed in the outer ear. A BTE that is connected with a slim tube and a dome can also be called an ‘open-fit. 

In-the-ear (ITE) hearing aid

This hearing aid is fitted directly into the outer ear, and all the components of the hearing aid are contained within the casing of the hearing aid.

Canal hearing aids

This is a hearing aid that fits within the ear canal and, like the ITE hearing aids, all the hearing aid components are contained within the casing of the hearing aid. There are two types of canal hearing aids:

  • In the canal (ITC) – This is a hearing aid that is made to fit in your ear canal 
  • Completely in the canal (CIC) – This is a hearing aid that is fitted, and nearly hidden, in the ear canal

It is important to note that the canal hearing aids are mainly used only for mild to moderate hearing loss.

Terms That Refer to the Hardware Found in Most Hearing Aids


The hearing aid microphone picks up sound from the surrounding environment and converts acoustic signals into electrical signals. There are 3 different microphones: 

  • Directional microphone – A directional microphone focuses on sound coming from in front of the hearing aid user and reduces the sound from behind and next to them. It is important to note that a directional microphone does not eliminate unwanted sounds, it only reduces the amplification of the sounds.
  • Omnidirectional microphone – This microphone focuses on all sounds around the user. Sounds will be heard from in front, next to, and behind them.
  • Adaptive microphone – This microphone automatically switches between a directional and omnidirectional microphone, depending on the listening environment.


The amplifier increases the strength (volume) of the electrical signal. 


The receiver converts the amplified electrical signal to an acoustic signal.

Features Found in Most Hearing Aids

Gain – Gain is the amount of amplification that a hearing aid provides. An audiologist can determine how much gain your hearing aid will need based on your hearing loss.

Output – This is often referred to as the maximum power output (MPO). This is the maximum amount of amplification that the hearing aid can provide. 

Hearing aid programs – Programs adjust the way sound is processed to adapt to specific listening environments. Noisy environments, listening to music, listening through your cell phone, and windy environments are a few examples of different listening environments. A variety of these programs can be stored on the hearing aid and can be chosen by pushing a button on the hearing aid or remote control. Advanced hearing aids can analyze the sound environment and will automatically adjust accordingly.

Bands – Bands in hearing aids control the volume in a specific frequency range. Hearing aid bands divide the signal coming into the aid into frequency regions. This allows for the adjustment of specific frequency ranges (by adjusting the gain), according to the user’s hearing loss, and therefore, making the hearing aid unique to the user’s hearing loss. 

Channels – Channels are a group of frequency bands that control a range of frequencies. The more channels a hearing aid has, the more the hearing aid can be fine-tuned which allows for better personalization to the user’s hearing loss. Channels also allow the hearing aid to accurately analyze the sound environment so that it can differentiate between speech and noise-like sounds.

Feedback – Feedback is a high-pitched whistling sound that hearing aids produce when the hearing aid microphone picks up the amplified sound from the receiver and amplifies it again creating a feedback loop and a whistling noise. Feedback can be caused by a damaged or poorly fitted ear mold, a crack in the hearing aid tubing, wax blocking the ear canal, or when the hearing aid volume is too high.

Feedback management/reduction – Feedback management reduces the feedback in the hearing aid by analyzing incoming signals and adjusting them immediately. It reduces feedback by minimizing the gain and through feedback cancellation. Feedback cancellation occurs when the hearing aid detects the feedback and immediately creates an identical signal in the opposite phase which cancels the signal out. This feature enables the hearing aid to maintain excellent sound quality. 

Digital noise reduction (DNR)This is a feature to make any speech signal in the presence of noise more comfortable while not reducing speech intelligibility. It manages to do this by separating the speech stimuli from noise stimuli.  

Frequency lowering – If you have a severe to profound hearing loss in the high-frequency range, it is sometimes difficult to provide an appropriate amount of amplification to these frequencies. Therefore, frequency lowering can allow the hearing aid to shift these high frequency sounds to a lower frequency region where hearing is generally better. This feature may allow for a better understanding of speech as a lot of important speech content is in the higher frequencies.

There are three types of frequency lowering:

  • Frequency transposition: Removes the high-frequency signal and shifts it to a lower frequency region
  • Frequency compression: Compresses high-frequency signal into a lower frequency region
  • Frequency translation: Keeps the high-frequency signal, but also moves it down to a lower frequency region

Sound generators or tinnitus maskers – This feature allows a hearing aid to produce internal sounds that can help reduce the perceived loudness of tinnitus that you may hear. 

Data logging – A data logging system records the different listening environments that the hearing aid user is exposed to throughout the day. It is important because it can’t be determined in a hearing healthcare professional’s quiet office. It also allows the hearing aid to record how many hours a day the user uses the hearing aid, how often the volume is increased or decreased, and how often the user changes their hearing aid programs. The hearing healthcare professional can analyze and review this information and then make appropriate decisions regarding fine-tuning adjustments to the hearing aid and resolve certain types of difficulties the user might experience with the hearing aid. 

Hearing aid remote controls – Many hearing aids operate with a remote control to change the programs and the volume, without having to touch the hearing aid. The wearer can also make these adjustments to their hearing aids by using a smartphone.

Blog author and hearing expert, Lisa Brown

Written byLisa Brown

Masters in Audiology

Want to Stay Informed

Sign up to our newsletter.